Fusion ProConnect Gun with Round 01-02 Mix Chamber and 0.047 in (1.2 mm) Orifice Size

The Fusion PC is a spray gun that can be used with adhesives, polyurethane, polyurea, polyurethane coating, and spray polyurethane foam. It is a manual, air purge gun that has a plural-component type and an impingement mix type. It has a round spray pattern and a two-finger trigger with a locking mechanism. It weighs 2.95 lb (47 oz) and has an overall height of 8.1 in, an overall length of 8 in, and an overall width of 3.3 in. It has a fluid orifice size of 0.047 in and an impingement port size of 0.047 in. It has a pattern size of 11 in at 24 in from the target. It has an air inlet size of 1/4 in with an NPT thread type, a component A inlet size of 1/2-20 with a UNF thread type, and a component B inlet size of 9/16-18 with a UNF thread type.

It has a maximum air inlet pressure of 0.9 MPa (130 psi), a maximum air pressure of 0.9 MPa (130 psi), a maximum flow rate of 50 lb/min, a maximum fluid pressure of 24.1 MPa (3500 psi), a maximum fluid temperature of 200°F, and a maximum fluid working pressure of 24.5 MPa (3500 psi). It has a minimum air inlet pressure of 0.55 MPa (80 psi). It has a sound power level of 91 dB(A) and a sound pressure level of 81.1 dB(A). It includes a PC47RD mix chamber tip and uses air as a purge method. It belongs to the round series and has a product type of spray gun. It has wetted parts made of aluminum, stainless steel, carbon steel, carbide, and chemically resistant o-rings. It is designed for use with non-flammable foam and polyurea.